TUV Certified Insulation Protects Solar Photovoltaic DC Cables for Solar Power Stations

• Customization: Available
• Application: Solar System
• Material Shape: Round Wire
• Model NO.: TUV IEC 62930
• Sheath Material: Xlpo
• Insulating Material: XLPE
• Conductor Type: Copper
• Brand: Yonghao
• Certification: TUV,UL,IEC,CE, CPR,ISO, RoHS,
• Wire Core Material: Tinned Copper
• Incoterms: Fob,CIF,CFR,DAP
• Color: Red,Black,Other
• Make: Suzhou Yonghao Cable Co.,Ltd.
• Transportation: Sea, Land and Air
• Transport Package: Pallet, Drum, Reel, Wooden Box
• Specification: PV1-F 4mm2 6mm2 Double Insulation
• Origin: China
• HS Code: 85446090
• Production Capacity: 1, 200km/Days

Product Description

Use	for Solar Plants Distribution System
Ambient Temperature	-40ºC~+90ºC
Test Voltage	6500V, 50Hz, 5min
Ambient Temperature	25 Years (TUV)
Origin	China
Production Capacity	1200km per day
Certification	TUV
Product Name	DC Solar PV Cable
Color	Black ,Red ,Brown,Grey Or Customized
Specification	1.5mm2, 2.5mm2, 4.0mm2, 6.0mm2, 10.0mm2, 16.0mm2, 25.0mm2, 35.0mm2
Number of Cores	Single Core,Two Core
Transport Package	Drum or Roll
Rated voltage	AC:Uo/U=0.6/1.0KV DC:1.0KV
Voltage test on completed cable	AC:6.5KV DC:15KV,5min
Weathering /UV-resistance	HD605/A1
ACID and Alkali resistance	EN60811-2-1
Cold bending test	EN60811-1-4
O-zone resistance at complete cable	EN50396
Flame test	IEC60332-1
Max Temperature at conductor	+120ºC
Service Life	25 years(-40ºC~+90ºC)
Approvals	TUV Rheinland

In the solar photovoltaic power generation system in the low-voltage DC transmission part of the cable, because the use of the environment and technical requirements are different, the connection of different parts have different requirements, the overall factors to consider are: cable insulation performance, heat resistance and flame retardant performance, aging performance and wire diameter specifications.
1. The connection cable between the solar cell module and the module is generally connected directly by the connection cable attached to the module junction box. When the length is not enough, a special extension cable can also be used. According to the different power size of the component, this kind of connecting cable has a cross-sectional area of 2.5m square meters, 4.4m square meters, 6.0m square meters and other three specifications. This kind of connecting cable uses double insulation outer skin, has superior protection against UV, water, ozone, acid, salt erosion ability, superior all-weather ability and wear resistance.
2. Use a multi-strand flexible cable that passes the UL test to connect the battery to the inverter. Choosing short and thick cables can reduce system losses, improve efficiency, and enhance reliability.
3. The cables connecting the battery array to the controller or DC junction box must also use multi-strand flexible wires that pass the UL test. The cross-sectional area depends on the maximum output current of the battery array.
The cross-sectional area of the DC cable at the named location shall be determined according to the following principles: Cables connecting solar modules, batteries and batteries, and AC load cables. Generally, the rated current of the cables is 1.25 times of the maximum continuous working current of each cable. For connecting cables between the solar cell array and the square array, and connecting cables between the battery (group) and the inverter, the rated current of the cable selected is generally 1.5 times of the maximum continuous working current in each cable.